ViewSonic VLCDS25973-2W Service Manual page 38

5.8.2 Setup Procedure
- Connect P2 of Fixture with
- Connect P3 of Fixture with DVI port of VP191 by DVI-DVI Cable.
- Connect P1 of Fixture with
- Plug Power Adapter to Fixture (JP1).
- Connect Power Cord to VP191 Monitor.
- Connect D-SUB 2
P3: to DVI-DVI Cable
JP1: to Power
Adapter
D-SUB
by VGA Cable with
PC signal
ViewSonic Corporation
D-SUB 1 port of VP191 by VGA Cable.
COM1 of PC by RS-232 Cable.
port of VP191 by VGA Cable
D-SUB 1--connected to P2 of
Fixture by VGA Cable
2--connected
with PC signal.
DVI port--connected
to P3 of Fixture by
DVI Cable
Confidential - Do Not Copy
35
P2: to VGA Cable
JP3 must be closed (short)
P1: to RS232 Cable
Connected to Power Cord
Turn on Power Switch
VP191b/s-1/-2