ViewSonic VLCDS25973-2W Service Manual page 27

Printer Port
PC
Power Adapter for Fixture
(P/N: 47.58201.001)
5.7.2 Fixture Setup Procedure
1. Connect P2 of Fixture with printer port of PC by Printer Cable.
2. Connect P1 of Fixture with VP191 Monitor by VGA Cable.
3. Plug Power Adapter to Fixture.
4. Connect Power Cord to VP191 Monitor, and turn on the Power Switch.
5. Connect PC to the additional monitor.
JP1: to Power Adapter
P2: to Printer Cable
ViewSonic Corporation
There are two types of Fixtures. Each of the
two can be used for FW upgrade.
Printer Cable
(P/N: 42.59906.001)
P1: to VGA Cable
Short Genesis
24
(P/N: 42.59901.003)
P1: to VGA Cable
Confidential - Do Not Copy
VP191
VGA Cable
P2: to Printer Cable
JP1: to Power Adapter
VP191b/s-1/-2