Cooking - GE JEM4JW Use & Care & Cooking Manual

The Time Cook I &II feature
allows you to microwave for a
preset amount of time using
automatic power level 10
(High), or change power level
automatically.
Power level 10 (High) is
recommended for most cooking,
but you may change this for more
flexibility. See the Cooking Guide.
To become better acquainted with
time cooking, make a cup of coffee
by following the steps below.
Step 1: Fill a cup 2/3 full of
water, add 1 teaspoon of instant
coffee and stir to dissolve. Use a
cup that has no metal decoration
and is microwave-safe (refer to
Microwaving Tips on page 3).
Place cup in oven and close the door.
TIME COOK
DEFROST
I
I
Step 2: Touch TIME COOK I & II
pad. Display shows "COOK" and
Step 3: Select your time. Touch
1,3 and O for one minute and 30
seconds. Display shows "1:30" and
"POWER 10?' "COOK TIME"
flashes.
Because automatic power level 10
is recommended for this cup of
coffee, there is no need to change
the power level. (If power level 10
is not appropriate, see "How to
Change Power Level" below.)
Step 4: Touch START. "COOK
counting down show on display.
Step 5: When time is up, the oven
signals and flashes "End~' Oven,
light and fan shut off.
Step 6: Open the door.
Feature
The Time Cook 11 feature lets you
set two time cooking functions
within one program. This is ideal
if you want to change power levels
during your cooking operations.
Here's how to do it.
Step 1: Place food in oven in
microwave-safe container and close
the door.
Step 2: Touch TIME COOK I & 11
pad. Display shows "COOK" and
"l." "ENTER TIME" is flashing.
Step 3: Select your cooking time.
For example, touch 2, 1 and 5 for
TIME
two minutes and U seconds. Display
shows "2:15" and "POWER 10~'
"COOK TIME" flashes.
Step 4: Touch TIME COOK I & II.
Step 5: Set your cooking time.
How to Change Nwer ~vel
After setting cooking time,
touch POWER LEVEL pad,
then touch desired number for
new power level.
Step 6: Touch START.
Step 7: "COOK TIME1' the
selected power level and the first
programmed cook time, counting
down, show on the display.
Step 8: At the end of the first
programmed cook time, the next
selected power level, "COOK
cook time, counting down, show on
the display.
Step 9: When time is up, the oven
signals and flashes "End~' The
and time
oven, light and fan shut off.
Step 10: Open the door.
Questions and Answers
Q. I set my oven for the time
called for in the recipe, but at the
end of the time allowed, my food
was not done. What happened?
A. Since house power varies due
to time or location, many Time
Cook recipes give you a time range
to prevent overcooking. Set the
oven for minimum time, test the
food for doneness and cook your
food a little longer, if necessary.
Q. I touched the number pads
and selected my power level. When
I touched ST-T, however, my
oven didn't come on. Why not?
A. The TIME COOK I & II pad
must be touched before setting the
number pads otherwise your oven
will not begin cooking.
Q. I want to cook on a power
level other than High. What do
A. To cook on a power level other
than High, first touch the TIME
COOK pad and set the desired
cooking time. Then touch the
POWER LEVEL pad. "POWER
10" appears on the display panel.
Enter new power level number and
touch START.
Q. Can I interrupt my Time
Cook function to check the food?
A. Yes. To resume cooking,
simply close the door and press
the START pad. The timer must be
reset for cooking to resume unless
time is remaining on timer.
7