Ptz (Decode Mode); Figure 36: Ptz Configuration - Grandstream Networks GXV3500 User Manual

PTZ (Decode Mode)

This page allows user to configure GXV3500 (decode mode) to use its related RS-485 port as output
rd
control of 3 party PTZ compatible device or TEXT output device via RS-485 port.
Figure 36: PTZ Configuration Page (Decoder)
 Protocol:
 Baudrate:
 Address ID:
NOTE:

The address ID has to be same and match the one used in the connected analogue camera. Otherwise
the PTZ will not function or behave abnormal due to the wrong Pelco-D or Pelco-P address used.

Detailed information of passing TEXT or CMD via RS-485 port, please refer to related 3
connected, or refer to HTTP API for more information:
http://www.grandstream.com/sites/default/files/Resources/grandstream_http_api_1.0.0.54.pdf
Grandstream Networks, Inc.
Pull-down to select supported PTZ protocol by connected
analogue camera. Only Pelco-D or Pelco-P allowed.
The baudrate used by the analogue camera interface, select from
the pull-down menu.
Hardware Pelco-D or Pelco-P address ID used by the analogue
camera, please refer to related camera user manual for this ID
(or PIN switch in the UM), then fill in related matching address
into this field.
GXV3500 User Manual
Firmware Version 1.0.1.94
rd
party device
Page 73 of 82
Last Updated: 05/2016