Wireless Mac Address Filtering - LevelOne WGR-2301 User Manual

security mechanism, this device will use the WPA mode based on the Pre-Shared
key.
WPA version: Sets the security mode this device will use:

Auto: Means that the device can automatically choose WPA-PSK or WPA2-PSK
safe mode according to the requests of wireless clients.

WPA: Means that the device will use the safe mode of WPA-PSK.

WPA2: Means that the device will use the safe mode of WPA2-PSK.
Encryption algorithm: It is used to encrypt wireless data, with the options like Auto,
TKIP and AES.

Auto: Means that the device will automatically choose encryption algorithms
according to needs.

TKIP: Means that all wireless data will use TKIP as the encryption algorithm.

AES: Means that all wireless data will use AES as the encryption algorithm.
Pre-shared key: The preset initialization key, with the value of 8 ~ 63 characters.
Key update cycle: It is the timed update cycle used to specify the key. Value range is
60 ~ 86400, in the unit of seconds. The default value is 3600, which means no update
when the value is 0.
7.3

Wireless MAC Address Filtering

This section describes the Wireless configuration->MAC filtering page and the
configuration of wireless MAC address filtering. By setting the MAC address filtering
function, you can enable or disable wireless hosts to or from access to the device and the
wireless network.
http://www.level1.com
Chapter 7 Wireless configuration
Page 58