Table of Contents
Advertisement
Important safety instructions
CAUTION: to reduce the risk of electric shock, do not
remove cover (or back). No user-serviceable parts
inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended
to alert the user to the presence of an
un-insulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation mark within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the equipment.
Instructions
Before installing or operating the equipment, read all
safety instructions, warnings and operating instructions.
Heed all warnings. Follow all instructions. Keep all safety,
installation and operating instructions for future reference.
Installing and operation location
Do not use this apparatus near water. Do not expose this
apparatus to drips or splashes. Do not place any objects
filled with liquids, such as vases, on the apparatus.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat. No naked flames, such as
lighted candles, should be placed on the apparatus.
Do not install the apparatus in a confined space such as
a book case or similar unit. Do not block any ventilation
openings.
Ensure that foreign objects and liquids cannot get into the
equipment.
Install in accordance with the manufacturer's instructions.
Only use attachments/accessories specified by the manu-
facturer.
4
apparatus combination to avoid injury from tip-over .
The apparatus should be located close enough to the AC
outlet so that you can easily grasp the power cord plug at
any time.
The mains plug, the appliance coupler or the mains switch
is used as the disconnect device. Either device shall
remain readily operable when the apparatus is installed
or used.
Power source and grounding
This product should be operated only from the power
source indicated on the apparatus or in the operating
instructions. If you are not sure of the type of power supply
to the premises where the equipment is to be used, consult
your product dealer or local power company.
Do not defeat the safety purpose of the polarised or
grounding-type plug. A polarised plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Connect Class I construction apparatus to an AC outlet
with a protective grounding connection.
Do not overload wall outlets, extension cords or integral
convenience receptacles, as this can result in a risk of fire
or electric shock.
Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles and the
point where they exit from the apparatus.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Copyright © GiVa Audiovisual Technologies BVBA
Important safety instructions
Use only with the cart, stand, tripod, bracket
or table specified by the manufacturer, or
sold with the apparatus. When a cart is
used, use caution when moving the cart/
Advertisement
Table of Contents
