Table of Contents
Advertisement
MC-UL810-00
3 SERVICE PROCEDURES
3.1.
CORD REEL
3.1.1.
Removal
1. Press tab and remove hose cover.
2. Remove lower nozzle hose from hose holder by pulling
down on the nozzle hose. It may be necessary to slightly
twist the nozzle hose to loosen from the hose holder.
3. Remove screw and pin.
4. Remove upper nozzle hose by Inserting a flat screwdriver
into the slot in the dust container as show and gently pry
hose from body.
5. Press the body slight forward, then tilt back to remove from
nozzle.
12
Advertisement
Table of Contents
