Mld-Snooping Last-Listener-Query-Interval - HP A5120 EI Series Command Reference Manual

Parameters
ipv6-group-address: Specifies the dddress of the IPv6 multicast group that the simulated host will join. The
effective range is FFxy::/16—excluding FFx0::/16, FFx1::/16, FFx2::/16 and FF0y::, where x and y
represent any hexadecimal number between 0 and F, inclusive.
ipv6-source-address: Specifies the address of the IPv6 multicast source that the simulated host will join.
vlan vlan-id: Specifies a VLAN, where vlan-id is in the range of 1 to 4094.
Description
Use the mld-snooping host-join command to enable simulated joining on a port. Namely, you configure
a port as a simulated member host for the specified IPv6 multicast group or source and group.
Use the undo mld-snooping host-join command to remove the simulated member host from the specified
IPv6 multicast group or source and group.
By default, this function is disabled.
This command works only on MLD snooping–enabled VLANs, and the version of MLD on the simulated
host depends on the version of MLD snooping running in the VLAN.
The source-ip ipv6-source-address option in the command is meaningful only for MLDv2 snooping. If
MLDv1 snooping is running, the source-ip ipv6-source-address option does not take effect although you
can include source-ip ipv6-source-address in the command.
In Layer 2 Ethernet interface view or Layer 2 aggregate interface view, this command takes effect only if
the interface belongs to the specified VLAN. In port group view, this command takes effect only on those
ports in this port group that belong to the specified VLAN.
Examples
# Configure GigabitEthernet 1/0/1 in VLAN 2 to join (2002::22, FF3E::101) as a simulated host.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping version 2
[Sysname-vlan2] quit
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mld-snooping host-join ff3e::101 source-ip 2002::22 vlan 2

mld-snooping last-listener-query-interval

Syntax
mld-snooping last-listener-query-interval interval
undo mld-snooping last-listener-query-interval
View
VLAN view
Default level
2: System level
54