Setting Menu Items-Setup - Kenwood DDX9903S Instruction Manual

SETTINGS
❏ Adjusting the touch position (Only
for DDX9703S/DDX6903S/DDX6703S/
DDX9716BTS/DDX916WSL)
You can adjust the touch position on the touch
panel if the position touched and the operation
performed do not match.
1
Display the source/option selection screen.
On the Home screen or the source control
screen:
2
Display the <SETUP> screen.
3
Display the <User Interface> screen.
72
4
Display the <Touch Panel Adjust> screen.
5
Touch the center of the marks at the lower
left and at the upper right as instructed.
• To reset the touch position, press [Reset].
• To cancel the current operation, press
[Cancel].
Setting menu items—SETUP
❏ Displaying the <SETUP> menu screen
1
Display the source/option selection screen.
On the Home screen or the source control
screen:
2
Display the <SETUP> screen.
• You can also display the <SETUP> screen by
selecting [SETUP] on the pop-up short-cut
menu. (Page 14)