Kenwood DDX9903S Instruction Manual page 53

BLUETOOTH
❏ Changing the PIN code
1
Display the <Bluetooth Setup> screen.
(Page 52)
2
Display the PIN code input screen.
3
Enter the PIN code (1), then confirm the
entry (2).
• Touch [ ] to delete the last entry.
❏ Change the device name of the unit
displayed on the paired device
1
Display the <Bluetooth Setup> screen.
(Page 52)
2
Display the device name entry screen.
3
Enter the device name (1), then confirm
the entry (2).
• Touch [ ] to delete the last entry.
• Touch [H]/[I] to move the entry position.
Using a Bluetooth mobile phone
❏ Receiving a call
When a call comes in...
• Call information is displayed if acquired.
• The call incoming screen is not displayed while
the camera screen is displayed. To display the
call incoming screen, shift the gear to the drive
position.
– Only for DDX6903S/DDX6703S: You can also
display the call incoming screen while the
camera screen is displayed by pressing and
holding the Volume/MENU/TEL knob on the
monitor panel.
To reject a call
When <Auto Response> is set to [ON] (Page 59)
The unit answers incoming calls automatically.
ENGLISH 53