Leveling/Adjustments/Alignment - Viking VGCC530 Installation Manual

Leveling/Adjustments/Alignment

1
Measure the four corners in cutout area to verify if
flooring is level.
3
Move unit into opening.
5
If leveling is required, move unit out of opening.
2
For uneven or sloped floors, level unit with metal shims
only, as the adjustment required may exceed
the thread available in the leg.
4
Check that unit is level side to
side and front to back. Side trim of the high corner
must be 3/8" (0.95 cm) above countertop.
6
1
Lift unit and prop on wood blocks.
17
" " "
3 / 8 3 / 8 3 / 8
) ) )
c m c m c m
9 5 9 5 9 5
( 0 . ( 0 . ( 0 .
1