Installation - ZALMAN CNPS9900 Max User Manual

5. Installation

A. Intel Socket Installation (Go to Page 8 For AMD Sockets)
Partially unscrew the four bolts located on the base of the CPU cooler. Then,
insert the Intel Clips between the base and the heatpipe cover, with the clips
bent away from the heatsink.
1) Intel Socket 2011 V3 / 2011 Installation (CNPS9900 MAX Series Only)
Apply thermal grease just enough to thinly cover the CPU surface. Then, insert four Silver
Bolts (type A) through the outermost Intel Clip holes, and using the 3/32" Allen Wrench,
fasten the Silver Bolts incrementally while alternating between them.
Caution
Please make sure to use the
Bolts with correct color and
thread length as they can
appear quite similar.
Heatpipe cover
Wrench
Gold Bolts
(Socket LGA 1366)
.COM
The holes in the Clip (as shown below) are
matched to the "keys" on the heatpipe cover
for secure Clip installation.
Insert
Key
Sliver Bolts A (4mm)
(Socket LGA 2011V3
/ 2011)
Base
Intel Clip
Sliver Bolt A
(4mm)
Sliver Bolts B (3mm)
(Socket AMD/LGA1156/
1155/1151/1150/775)
4