Advertisement
7. Compatible CPUs
1) All Intel Socket 775 CPUs
- Pentium D
- Pentium 4
- Celeron D
Air Guide equipped cases recommended for CPUs with high TDP.
Zalman's Super Thermal Grease recommended for better thermal performance.
8. Installation
1) Intel Pentium D / Pentium 4 - Socket 775
① ①
Backplate Installation
Remove the protective film of theBackplate for
Socket 775, and attach the backplate after
aligning it with the holes from the backside of
motherboard.
② ②
Thermal Grease Application
Clear off any particles and residue from the top
of the CPU then spread the enclosed Thermal
Grease generously on the surface of the CPU
that makes contact with the base of CNPS8000.
③ ③
Clip Installation
Inter rock the pair of Clips for socket 775 by
sliding them into each other between the
heatsink's base and fin.
Caution) The arrowhead marking on each clip must
be in line with the arrowhead markings on
the heatsink's base.
④ ④
Cooler Installation
Place the CNPS8000 on the center of the CPU.
Slightly screw the four bolts onto the backplate's
nipples, then tighten each bolt one rotation at a
time until all are completely tightened.
Note 1) Excessive force can result in damage to the
nipples.
Note 2) Exerting excessive force on the fan with the
driver can result in malfunction.
⑤ ⑤
Power Connection (FAN MATE2 Installation)
Please refer to FAN MATE 2 Installation and Usage on page 5.
The specifications of any product may change without prior notice to improve performance.
※
2) All AMD Socket 754/939/940 CPUs
- Opteron
- Athlon 64 X2
- Athlon 64 FX
- Athlon 64
- Sempron
Mounting hole
Nipple
CPU(IHS)
Base
Protective Film
Backplate for
Socket 775
Thermal Grease
Bolt
Clip for
Socket 775
3
Advertisement
