Ricoh WG-M1 Operating Manual page 60

Connection setting method of the
camera and the smart device:
Step 1: Install the dedicated application on the
smart device.
Download the dedicated application (WG-M1)
from Google Play or App Store, and install it on
your smart device.
Step 2: Setting up the camera
Press in the viewfinder status, select 「AP
Settings」, and press
connection function so that the SSID screen
in 「AP mode」 appears. SSID and WPA2
password messages are displayed in the
screen.
AP mode
SSID:RICOH-WG-M1_XXXX
WPA2-PSK:00000000
SSID screen
Wireless connection process takes about
30 seconds. During this process, only
is activated.
to enable wireless
Press or to select
to change the WPA2 password.
If there is a need to turn off wireless, press
button or press
so that the selection interface appears.
Select , press
AP mode
Wireless connection interrupted screen
, then press
after selecting
to turn off wireless.
59