Reset Settings - Ricoh WG-M1 Operating Manual

Copy to Card
Copy to Card is to copy the files in the internal
memory to the memory card.
There are 2 options in 「Copy to Card」:
• Cancel
• Confirm
When the memory card cannot be
detected by the product, options will
not be displayed on 「Copy to Card」
interface.

Reset Settings

Reset Settings can reset all product settings to
the factory defaults.
There are 2 options in 「Reset Settings」:
• Cancel
• Confirm
46
FW Version
FW Version can display the current firmware
version.
Screen rotate
When this function is enabled, the display on
the LCD screen will rotate 180 degrees (up and
down).
Images transferred from the camera can be
played back on your computer with a software
that supports image rotation.
There are 2 options in 「Screen rotate」:
• Off
• Enable