Ricoh WG-M1 Operating Manual page 52

Loop recording
Loop recording allows to record independent
segments of movies according to selected
time length. The product will continually record
movies until the video recording button is
pressed to terminate recording. When the
memory card is full, the product will overwrite
the recorded files to record another movies
circularly.
There are 3 options in 「Loop recording」:
• Off
• 5 minutes
• 10 minutes
Loop recording method of operation:
1. After selecting Loop recording time, press
to return to the viewfinder status. LCD
will display corresponding icons;
2. Press to start recording;
3. Press again to finish recording.
00:00:23 00:00:23
Movie Size cannot be set to
.
When Time Lapse or Motion detection
is enabled, the Loop recording feature
cannot be used.
Loop recording feature can only be used
when there is a memory card in the
product.
Turn off the product when the Loop
recording function is enabled and then
restart the product. You'll find the Loop
recording function is still enabled.
or
120
51