Samsung NP300u1a User Manual page 87

Upgrading Memory
2
Pull the memory module latches outward. The memory
module will pop up. Remove the memory module out at an
angle of 30 degrees.
3
Insert a new memory module into the memory slot at an
angle of approximately 30 degrees aligning it to the angle of
the memory slot.
(For 11.6 inch models)
Memory Slot
4
Push the memory module down so that it is completely fi xed.
If the memory does not fi t easily, push the memory module
down while pulling the memory module latches outward.
5
Close the memory compartment cover and fasten the screw.
Chapter 3.
86
Settings and Upgrade