Samsung NP300u1a User Manual page 53

Connecting an External Display Device
2
Connect the power cord of the connected monitor, TV or
projector and turn the power on.
3
Press the +
setting screen appears where you can select the monitor
mode.
Since pressing the
key changes the selection, select a display device.
LCD
CRT
LCD+CRT Clone
LCD+CRT Dual View
key combination once. Then the
key while holding down the
• If the screen is not switched even if you press the
key combination, you have to install the Samsung
Control Center program.
Alternatively, to set up dual view:
•
Open the Display Settings window in the Control Panel,
select Monitor 2 and select the Expand to fi t to this
monitor checkbox to set dual view. For more detailed
information, refer to the Windows online help.
Chapter 2.
52
Using the computer
+