Factory Default Settings - Miele G 4960 Operating Instructions Manual

Factory default settings

If you have altered any settings from
the factory default, you can reset them
back to the factory default settings as
follows:
 Open the door.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the programme selector button
 in and, whilst holding it in, switch
the dishwasher on using the  but‐
ton.
Keep the programme selector button
 pressed in for at least 4 seconds
until the lower right-hand programme
indicator comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Programme options
 Press the  button 19 times.
The  indicator light will do 1 long
flash and 9 short flashes at intervals.
The flashing sequence in the display in‐
dicates whether a setting has been
changed from its factory default.
–  : All settings are set to factory de‐
fault settings.
–  : At least one setting has been
changed.
 To reset the dishwasher to the factory
default settings, press the pro‐
gramme selector button .
The setting is now stored in memory.
 Switch the dishwasher off with the 
button.
63