Advertisement
How to Identify Parts of Vacuum Cleaner
Handle
Turbo nozzle
Filter cover, filter
and screen
(located inside dust cup)
Self-cleaning duster
Duster activation knob
Headlight
Height adjustment knob
Edge cleaner windows
Maintenance Schedule is also located on back side of dust cup.
Assemble the vacuum cleaner before using. Moving parts. Make sure ON/OFF switch is in OFF (O) position before plugging in power cord.
Filter cover
Filter
DCF21
Screen
HEPA
Filter HF10
Brush roll
2 Eureka Customer Service HELPLINE 1-800-282-2886
On (I) / Off (O) power switch
On (I) / Off (O) brush roll switch
Dust cup
HEPA filter compartment
Check brush roll light
Brush roll reset button
Brush roll cover
Filter Maintenance Schedule
Cogged belt
Dusting brush
Hose hook
Tool caddy,
carry handle &
upper cord wrap
Nested crevice tool
& extension wand
Quick release
cord wrap
Handle release
DUST CUP – Empty after each use
Push lever to release bottom lid.
Debris will empty.
FILTER DCF21 – Clean or replace regularly to maintain suction
Empty cup. Pull back
Pull out filter cover,
latch to lift off lid.
filter and screen.
Align tab on screen
Reinstall filter cover,
with slot in cup.
and filter.
LID WILL NOT CLOSE WITHOUT FILTER IN PLACE
HEPA FILTER HF10 – Replace within 6 months
Lay flat and
Lift latch to
unlock door.
remove dust cup.
BRUSH ROLL – Clean monthly
Hose
Hose wand
Power cord
Hose retainer
Close bottom lid
until it clicks.
Rinse cover, filter and
screen; dry thoroughly.
Align lid at front; press down
until lid snaps into place.
Replace
Replace door
filter.
and lock.
www.eureka.com
Advertisement
