Lexmark Z700 series User Manual page 46

3
Snap the cartridges into place.
4
Close the front cover.
Note: The front cover must be closed to start a print job.
Specifying cartridge settings in the printer software
Before you specify the print cartridge settings in the printer software, install the cartridges. For help,
see "Installing the cartridges" on page 45.
1
Open the LSC. For help, see "Lexmark Solution Center" on page 11.
2
From the Maintenance tab, click Install a new print cartridge.
3
Select the type of cartridge you installed.
Note: Specify whether the cartridge is a new cartridge or an old cartridge (one that has
4
Click OK or Next.
5
If you installed a new cartridge, continue with "Aligning the print cartridges."
Downloaded From ManualsPrinter.com Manuals
been used before). If an old cartridge is incorrectly identified as New Cartridge in
the Lexmark Solution Center, ink levels may be incorrect.
Replacing the print cartridges
46