Lexmark T642 User Manual page 49

To load print media:
1
Push the release latch, and lower the multipurpose feeder.
2
Pull the tray extension out.
3
Slide the width guide to the far right.
4
Flex the sheets or envelopes back and forth to loosen them, then fan them. Do not fold or crease the print media.
Straighten the edges on a level surface.
Downloaded From ManualsPrinter.com Manuals
Note: Do not add or remove print media when the printer is printing from the multipurpose feeder or when
the operator panel indicator light is blinking. Doing so may cause a jam.
Note: Do not place objects on the multipurpose feeder. Also, avoid pressing down or applying excessive
force on it.
Note: Hold transparencies by the edges and avoid touching the print side. Fan the stack of transparencies
to prevent jams. Be careful not to scratch or leave fingerprints on the transparencies.
Envelopes
Transparencies
Loading the multipurpose feeder
Printing
Paper
49