Lexmark T642 User Manual page 31

6
Make sure each latch fits over the notch on the end of the card.
Removal
1
Remove the system board access cover. (See Accessing the printer system board.)
Warning:
2
Push the latches away from the card on both ends of the memory card connector.
The memory card moves out of the connector as the latches open.
3
Pull the memory card out of the connector.
Avoid touching the connection points along the edge of the card.
4
Place the card into the original packaging.
If you do not have the original packaging, wrap the card in paper, and store it in a box.
5
Close both latches.
Downloaded From ManualsPrinter.com Manuals
Installing and removing options
Memory connector
Memory card
Printer memory memory cards are easily damaged by static electricity. Touch something metal such
as the printer frame before you touch a memory card.
Installing or removing a memory card
31