Using The Side Discharge; Transporting Machines - Toro Z Master G3 Operator's Manual

With a 60in turbo force side discharge mower
Hide thumbs Also See for Z Master G3:
Table of Contents

Advertisement

Figure 36
1. Vertical to push the
machine
4. Rotate the release valve levers horizontally to run
the machine (Figure 36).

Using the Side Discharge

The mower has a hinged grass deflector that disperses
clippings to the side and down toward the turf.
Without a grass deflector, discharge cover, or
complete grass catcher assembly mounted in
place, you and others are exposed to blade
contact and thrown debris. Contact with
rotating mower blade(s) and thrown debris will
cause injury or death.
• Never remove the grass deflector from
the mower because the grass deflector
routes material down toward the turf. If the
grass deflector is ever damaged, replace it
immediately.
• Never put your hands or feet under the
mower.
• Never try to clear the discharge area or
mower blades unless you move the power
take off (blade control switch (PTO) to the
off position, rotate the ignition key to off
and remove the key.
• Make sure the grass deflector is in the down
position.
2. Horizontal to run the
machine

Transporting Machines

Use a heavy-duty trailer or truck to transport the
machine. Ensure that the trailer or truck has all
necessary brakes, lighting, and marking as required by
law. Please carefully read all the safety instructions.
Knowing this information could help you, your family,
pets or bystanders avoid injury.
Driving on the street or roadway without turn
signals, lights, reflective markings, or a slow
moving vehicle emblem is dangerous and can
lead to accidents causing personal injury.
Do not drive machine on a public street or
roadway.
To transport the machine:
1. If using a trailer, connect it to the towing vehicle
and connect the safety chains.
2. If applicable, connect the trailer brakes.
3. Load the machine onto the trailer or truck.
4. Stop the engine, remove the key, set the brake, and
close the fuel valve.
5. Use the metal tie down loops on the machine to
securely fasten the machine to the trailer or truck
with straps, chains, cable, or ropes (Figure 37).
1. Traction unit tie down loops
26
Figure 37

Advertisement

Table of Contents
loading

This manual is also suitable for:

74915

Table of Contents