Perform Axle Maintenance; Perform Engine Maintenance - John Deere Models - Genie GTH-1048 Service Manual

Section 3 • Scheduled Maintenance Procedures
CHECKLIST A PROCEDURES
A-8

Perform Axle Maintenance

Axle specifications require that this procedure be
performed every 50 hours or monthly, whichever
comes first.
Required maintenance procedures and additional
axle information is available in the
Dana 213 Axle Maintenance and Repair Manual
(Dana part number 0243).
Dana 213 Axle Maintenance and Repair Manual
Genie part number
3 - 10
A-9
Perform Engine Maintenance -
John Deere Models
Engine specifications requires that this one-time
procedure be performed after 100 hours of
operation.
Required maintenance procedures and additional
engine information is available in the
John Deere 4045HF485 Operator's Manual
(John Deere part number OMRG36852)
John Deere 4045HF485 Operator's Manual
115026
Genie part number
GTH-1048 • GTH-1056
September 2014
123703
Part No. 123701