Travel Lock - Philips RQ1095 Instruction

Note: The displays of types RQ1062, RQ1060, RQ1052
and RQ1050 look different but show the same
indication.

travel lock

You can lock the shaver when you are going to
travel. The travel lock prevents the shaver from being
switched on by accident.
activating the travel lock
1 Press the on/off button for  seconds to enter
the travel lock mode.
The lock symbol appears on the display (all
,
types) and you hear a beep (RQ100 only) to
indicate that the travel lock has been activated.
Note: The displays of types RQ1062, RQ1060, RQ1052
and RQ1050 look different but show the same
indication.
Deactivating the travel lock
1 Press the on/off button for  seconds.
The motor starts running to indicate that the
,
travel lock has been deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-in
Power Pod or Jet Clean System, the travel lock is
automatically deactivated.
Blocked shaving heads
- If the shaving heads are blocked, the shaving unit
symbol and the tap symbol with exclamation mark
flash. In this case, the motor cannot run because
the shaving heads are soiled or damaged.
English
1