Philips 288P6 User Manual page 12

2. Setting up the monitor
How to enable MultiView by hotkey?
1. Press the hotkey
front bezel.
2. The MultiView selection menu appears.
Press ▲ or ▼ button to select.
PIP
PBP
Swap
Off
3. Press button to confirm your selection
and then exit automatically.
How to enable MultiView by OSD menu?
Besides pressing the hotkey
the front bezel, the MultiView function can also
be selected in OSD menu.
1. Press button on the front bezel to
enter OSD Menu Screen.
PIP/PBP Mode
Input
PIP/PBP Input
PIP Size
Picture
PIP Position
Swap
PIP/PBP
Audio
Color
directly on the
Multi View
P
directly on
Off
PIP
PBP
• Press ▲ or ▼ button to select main menu
[PIP / PBP], then press
• Press ▲ or ▼ button to select [PIP / PBP
Mode], then press
• Press ▲ or ▼ button to select [PIP] or
[PBP].
• Now you can move backward to set the
[PIP / PBP Input], [PIP Size], [PIP Position].,
or [Swap].
2. Press button to confirm your selection.
MultiView in OSD menu
• PIP / PBP Mode: There are two modes for
MultiView: [PIP] and [PBP].
[PIP]: Picture in Picture
Open up a sub-window of
another signal source.
When the sub source is not
detected:
[PBP]: Picture by Picture
Open up a sub-window side-
by-side of another signal
source.
When the sub source is not
detected:
Note
The black strip shows on the top and the
bottom of the screen for the correct aspect
ratio when in the PBP mode.
10
button.
button.
B
A
(main)
B
A
(main)
A B
(main)
A
(main)