Polycom voicestation 500 User Manual page 14

2. When the incoming call ring is
Redialing the last dialed number in Wired
Audio Mode
• Redial the last number using
Transferring audio between devices in
Wired Audio Mode
• The connector cable (mobile phone
Changing between calls in Wired Audio
Mode
The Mode button can be used to swap be-
tween the POTS, Bluetooth and the Wired
Audio calls:
1. Making/Answering a POTS call
2. Making/answering a Bluetooth call
Downloaded from www.Manualslib.com
heard, answer it as you normally
would.
the mobile phone or computer
connected to the VoiceStation™
500.
or computer) with 2.5 mm connec-
tor needs to be removed from the
mobile phone or computer.
when in Wired Audio Mode: Press
the Mode button, press the On/Off
button, make/answer the phone call.
The Amber LED should not be lit.
When finished, press the On/Off
button, then press the Mode button
again.
when in Wired Audio Mode: Press
the Mode button, then make/answer
the phone call. The Bluetooth LED
should be on (blue). When finished,
press the Mode button again. The
LED should return to amber.
manuals search engine
Muting a call on VoiceStation™ 500
1. Press the Mute button on the
VoiceStation™ 500 to mute/unmute
a call as described in the "POTS
Mode" section of this User Guide or;
2. The mobile phone Mute/Unmute
button can be used.
Changing Volume
1. Press the Volume Up/Down buttons
on the VoiceStation™ 500 to adjust
the volume to the desired level as
described in the "POTS Mode" sec-
tion of this User Guide or;
2. Use the mobile phone to adjust the
volume.
Recording an audio call
• Please refer to the 'Record a Con-
versation' section of this User's
Guide as described in the "POTS
Mode" section of this User Guide.
Disconnecting Wired Audio Mode on
VoiceStation™ 500
1. End the phone call as you normally
would.
2. Unplug the cable from the
2.5mm port on the side of the
VoiceStation™ 500. The amber
LED should turn off, bringing the
VoiceStation™ 500 to POTS mode.
VoiceStation™ 500 - 14