Dimplex LA 17TU Installation And Operating Instructions Manual page 24

11
1 Type and order code
2 Design
2.1 Model / controller
2.2 Thermal energy metering
2.3 Installation location / degree of protection according to EN 60529
2.4 Antifreeze condensate tray / heating water
2.5 Performance levels
3 Operating limits
3.1 Heating water flow / return
Air (heat source)
4 Performance data / flow rate
4.1 Heating water flow rate /
internal pressure differential
Minimum heating water flow
2
4.2 Heat output / COP
4.3 Sound power level
4.4 Sound pressure level at a distance of 10 m
(air outlet side)
4.5 Air flow
5 Dimensions, connections and weight
5.1 Device dimensions without connections
5.2 Device connections for heating system
5.3 Weight of the transportable unit(s) incl. packaging
5.4 Refrigerant; total filling weight
5.5 Lubricant; total filling quantity
6 Electrical connection
6.1 Nominal voltage; fuse protection
6.2 Starting current with soft starter
6.3 Nominal power consumption A2 W35/
2 3
max. consumption
6.4 Nominal current A2 W35 / cosϕ
6.5 Max. power consumption of compressor protection
(per compressor)
7 Complies with the European safety regulations
8 Additional model features
Type of defrosting (according to need)
1. The heat circulating pump and the heat pump controller must always be ready for operation.
2. This data indicates the size and capacity of the system according to EN 255 (10K at A2) and EN 14511 (5K at A7) without a weather-proof protective cover. For an analysis of the
economic and energy efficiency of the system, other parameters, in particular the defrosting capacity, the bivalence point and the regulation, should also be taken into considera-
tion. The specified values have the following meaning, e.g. A7 / W35: External air temperature 7 °C and heating water flow temperature 35 °C.
3. 2-compressor operating mode
4. 1-compressor operating mode
5. The specified sound pressure level corresponds to the operating noise of the heat pump in heating operation with a flow temperature of 35°C.
6. See CE declaration of conformity
EN-10
°C
°C
A7/W35/30 m³/h / Pa
A7/W45/38 m³/h / Pa
A7/W55/45 m³/h / Pa
at A-7 / W35 kW / ---
kW / ---
at A2 / W35 kW / ---
kW / ---
at A7 / W35 kW / ---
kW / ---
at A7 / W55 kW / ---
kW / ---
at A10 / W35 kW / ---
kW / ---
dB(A)
5
dB(A)
m³/h
H x W x L mm
Inches
kg
type / kg
type / litres
V / A
A
kW
3
A / ---
W
LA 40TU
Universal / external
Integrated
Outdoor / IP24
Heated / yes
up to 58 ± 2 / from 18
-25 to +35
6.2 / 3900
4.3 / 1900
3.0 / 950
EN 255
3
24.3 / 3.1
4
13.8 / 3.2
3
29.6 / 3.9
4
17.1 / 4.0
3
4
3
4
3
38.5 / 4.8
4
22.0 / 5.0
11000
2100 x 1735 x 952 (750)
1 1/2'' internal thread
R404A / 11.8
Polyolester (POE) / 4.1
400 / 25
7.9 / 12.6
14.2 / 0.8
70, thermostatically controlled
Reverse circulation
1
2
EN 14511
23.8 / 3.0
13.5 / 3.1
29.3 / 3.8
16.8 / 3.9
35.7 / 4.4
20.0 / 4.6
33.1 / 2.7
17.6 / 2.7
38.1 / 4.7
21.7 / 4.9
70
43
585
30
6