Use The Best Available Audio Connection; Connections For Most Cd Or Dvd Playback - Oppo DV-970HD Advanced Setup Manual

Supplement to the user manual
Hide thumbs Also See for DV-970HD:
Table of Contents

Advertisement

S E T T I N G
U P
T H E

Use the Best Available Audio Connection

Connections for Most CD or DVD Playback

If at all possible you will want to connect audio using digital cables (either coaxial S/PDIF or optical S/PDIF). If
your receiver or integrated amplifier does not have Dolby Digital or DTS capability (for instance, an older Pro
Logic model) then you should connect the "Mixed" stereo output of the OPPO DVD player to your receiver or
integrated amplifier (and immediately start saving for an upgrade!) Setting up, you have the following choices:
No Surround Speakers: If the audio system does not have surround speakers, please use the
analogue RCA-style cables and set the Speaker Setup Page > Down-mix to "Stereo" or "V.
Surround".
Surround, But No Dolby Digital or DTS Support: If the audio system has surround speakers
and Dolby Pro Logic Surround support, please use the analogue RCA-style cables set the
Speaker Setup Page > Down-mix to "Left/Right".
Surround Speakers and/or DTS and/or Dolby Digital Support: If your receiver supports Dolby
Digital and/or DTS then please use a digital coaxial or optical cable and set the Audio Setup
Page > SPDIF Output to "Raw". No additional audio cables will be needed unless you listen to
SACD (see below).
Speaker Setup Page > Downmix*
settings: Left/Right, Stereo, V.Surr, 5.1CH
*does not affect digital player outputs
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
P L A Y E R :
B A S I C S
Analogue
Audio Cables
GOOD
(Red/White)
Audio In
AV Receiver/Integrated Amplifier
Off
Rear Panel
BEST
Coaxial In
Optical In
Connect ONE of these
digital audio cables:
Coaxial S/PDIF
or Optical S/PDIF
EQ Type
Sound Field
SPDIF Output
LPCM Rate
Audio Tone
Pro Logic II
Dolby Digital Setup
HDMI Audio
Audio Setup Page > SPDIF Output*
settings: Raw, PCM
*does not affect analogue player outputs
6
None
Off
Raw
48K
00
On

Advertisement

Table of Contents
loading

Table of Contents