Oppo DV-983H Command Reference

OPPO DV-983H Up-Converting Universal Player
RS-232C Remote Control Command Reference
1． RS-232C Connection
The OPPO DV-983H Up-Converting Universal Player is equipped with an RS-232C port
for wired remote control. The port is configured as a DCE device. To connect the DV-
983H to the RS-232C port of a PC, a straight-through DB9 9-pin D-Sub type RS-232
serial cable is needed. Do NOT use a "Null-Modem" type cable.
The pin out of the DV-983H RS-232C port is as the following:
Pin
2
3
5
2． Data Rate Settings
The data rate setting for remote control is: 9600bps, 8-bit data, 1-bit stop, no parity, no
flow control.
3． Command Reference
The following commands are supported. Each command must start with a # character at
the beginning of the line and end with a carriage return character.
3.1 Command that maps to a remote control button
Command Text Command Hex
#POW↵
#PON↵
#POF↵
#EJT↵
#BMK↵
#SFD↵
#EQR↵
#CAP↵
#BRW↵
#VUP↵
#VDN↵
#MUT↵
#NU1↵
#NU2↵
#NU3↵
OPPO Digital, Inc. • 2629 Terminal Blvd, Suite B • Mountain View CA 94043 • Tel: (650) 961-1118 • Fax: (650) 961-1119 • www.oppodigital.com
Signal
TXD
RXD
GND
Remote Key
23 50 4F 57 0d Power on/off
23 50 4F 4E 0d Power on
23 50 4F 46 0d Power off
23 45 4A 54 0d Tray eject/retract
23 42 4D 4B 0d Bookmark
23 53 46 44 0d SF – Sound field
23 45 51 52 0d EQ – Equalizer mode
23 43 41 50 0d Capture
23 42 52 57 0d INFO – Disc info browser
23 56 55 50 0d Volume +
23 56 44 4E 0d Volume -
23 4D 55 54 0d Mute
23 4E 55 31 0d Number 1
23 4E 55 32 0d 2
23 4E 55 33 0d 3