Important Information CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE THE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
I M P O R T A N T I N F O R M A T I O N Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth.
I M P O R T A N T I N F O R M A T I O N 13) When smoke, abnormal smell or sound appears from the product, please cut off power immediately and contact your dealer or service center. 14) Never insert any metal object into the cabinet.
• “DCDi” is a trademark of Faroudja, a division of Genesis Microchip Inc. • The 480p/720p/1080i/1080p up-converting arrow logo is a trademark of OPPO Digital, Inc. • All other trademarks are the properties of their respective owners. Compatible Disc Types...
8. ARROW Buttons – Navigate menu selection 9. SELECT Button – Confirm menu selection 10. SETUP Button – Enter the DVD player setup menu 11. SUBTITLE Button – Change subtitle language / Switch picture display mode 12. AUDIO Button –...
I N S T A L L A T I O N Battery Installation 1. Remove the battery compartment cover Using the Remote Control When using the remote control, the front window of the remote control should be pointed to the infrared sensor on the front panel within an angle of ±30°...
HDMI cable to connect the DVD player to the TV. This connection method delivers both video and audio in pure digital format via a single cable. The HDMI video output of the DVD player presents the highest possible resolutions and video quality.
• Please use the Red/White audio cables to connect the MIXED audio output of the DVD player to the TV. Make sure the audio cables are connected to the same input terminal group on the TV as the DVI input. Usually the input terminals are marked as “DVI Audio” or “PC Audio”. On some TVs you may need to use an RCA-3.5mm Mini-Jack adapter cable to connect the audio.
I N S T A L L A T I O N Connecting to an Audio System Connecting to a Receiver/Amplifier with HDMI Input/Output Method 3 – HDMI Connection to Receiver and TV • HDMI can transmit both audio and video signals over a single cable. If you have an HDMI- capable receiver that can support HDMI audio, you can simply run an HDMI cable from the DVD player to your receiver and enable HDMI audio on the receiver (see your receiver’s owners’...
• Please use 6 RCA-style audio interconnect cables to connect the FRONT L/R, SURROUND L/R, CENTER and SUBWOOFER analog outputs of the OPPO DVD player to the corresponding multi-channel analog audio input jacks of your A/V receiver. Method 4 – 5.1ch Analog Audio Connection...
I N S T A L L A T I O N Connecting to a Receiver/Amplifier with Dolby Digital or DTS Decoder • Please use either a 75-Ohm coaxial digital audio cable with RCA-style connectors or an S/PDIF optical digital audio cable to connect one of the digital audio outputs to the corresponding input terminal on your A/V receiver.
If your audio system only offers stereo audio inputs, you can connect it to the MIXED L/R audio outputs of the DVD player using the supplied Red/White audio cables. Depending on the capability of your audio system, you may set up your DVD player with one of the following configurations: •...
Setting Up the Player - Initial Setup Use the Setup Menu System In many places of this guide, the DVD player’s Setup Menu needs to be adjusted to match your specific audio/video configuration. When asking you to make menu adjustments, we will use the following terminology to indicate the location of the desired function: Setup Menu Name >...
Page 19
I N S T A L L A T I O N 2. Press the left/right ARROW buttons to select the setup page. There are 5 pages: General Setup Page, Speaker Setup Page, Audio Setup Page, Video Setup Page, and Preference Page.
Determine Your Display Type Widescreen, or 16:9 TV For best performance, your OPPO DVD player must be correctly configured for playback even before the first disc is inserted. This is done under General Setup Page > TV Display in the Setup Menu.
2. Turn on the TV. Adjust the TV to use the proper input (HDMI or DVI). 3. Turn on the DVD player with no disc in its tray, or if the DVD player is already on, make sure that playback is completely stopped.
Audio Connection Directly to TV If your DVD player is connected directly to the TV through HDMI (as described in “Method 1” on page 8) or through DVI and analog L/R audio cables (as described in “Method 2” on page 9), it is recommended that you keep the factory default settings.
Page 23
Multi-Channel Analog Audio to Receiver If your DVD player is connected to an A/V receiver through the 5.1ch analog audio jacks using 6 RCA cables (as described in “Method 4” on page 11), you can play all supported audio formats and listen to it with your A/V receiver and surround systems.
Page 24
If you primarily listen to stereo contents or your receiver only offers stereo audio connections, please use the analog RCA-style cables to connect the MIXED L/R output of the DVD player to your receiver, as described in “Method 6” on page 13 of this guide. Depending on whether the receiver has surround speakers and supports Dolby Pro Logic II decoding, you may use one of the following audio configurations: •...
CRT screens caused by displaying a static image for a prolonged period of time. 1. Press the POWER button to turn on the DVD player. 2. Press the OPEN/CLOSE (EJECT) button to eject the disc tray. 3. Place the disc with the label side facing up and the record side facing down.
2. The VOL +/- buttons on the DVD remote control is provided as an alternative way of controlling the audio volume. It is recommended that you use this control to make the audio volume from the DVD player the same as from other sources, such as TV programs or a VCR.
B A S I C O P E R A T I O N S NOTE Check the MUTE status by pressing the MUTE button when there is no audio output. OSD (On-Screen Display) Press the OSD button on the remote control to show disc information and operation function hints on the TV screen.
This function is available only when the discs are recorded with multiple angles. • The angle mark on the screen can be turned off using the setup menu of the DVD player. Zooming the Displayed Frame The feature zooms in or out the displayed frame.
B A S I C O P E R A T I O N S 2. When the frame is magnified, press the ARROW buttons to move the visible area in the frame (Panning). Sound Field and EQ Mode Adjustment When playing discs, you may adjust sound field or equalization mode according to your preference.
Each press of the REV button switches the playback speed in the following sequence: When the video output is set to PAL or NTSC system, the DVD player will convert the disc content to the selected system if it is different.
A D V A N C E D O P E R A T I O N S Slow Playback To slow down the playback speed, please use the following steps. 1. Press the SLOW button on the remote control and the player starts 2.
A D V A N C E D O P E R A T I O N S 3. The player now repeatedly plays back the specified section (A-B). 4. Press the A-B button for the third time to resume normal playback. NOTE Not available for all disc formats or contents.
A D V A N C E D O P E R A T I O N S 1. Title and chapter search. For example, search for Title 6, Chapter 2: • Press the GOTO button on the remote, and the TV screen displays: (You may need to use the ARROW buttons to move the cursor to the “Title”...
DVD player will save the current playing position. the disc. played back, the DVD player will recognize the saved playing position. Playback will automatically resume from the saved playing position. However if you wish to cancel the automatic resume and start playback from the beginning, you may press the STOP button when prompted.
A D V A N C E D O P E R A T I O N S Viewing Static Pictures on DVD-Audio Discs Some DVD-Audio discs contain static pictures, such as photos of the band or narration of the album. When a DVD-Audio track is playing, you may use the ANGLE button to select the previous picture or the ZOOM button to select the next picture.
A D V A N C E D O P E R A T I O N S Disc Browser The disc browser enables you to conveniently view the disc information, perform disc navigation and playback control. The following example shows how to use the disc browser during DVD playback. 1.
A D V A N C E D O P E R A T I O N S The Status Window contains the following elements: 1. Elapsed play time of the current digital audio file 2. Total play time of the current digital audio file 3.
A D V A N C E D O P E R A T I O N S Digital Picture Play Operations When a picture is displayed in full screen slide show mode, the following operations are available: • • •...
SETUP MENU OPTIONS The Setup Menu of the DVD player presents many setup and configuration options. For most users, the default configuration works well enough and there is no need to change the settings. However if you need to configure the DVD player to perfectly match your home theater settings and watching preference, please refer to the following sections for details about each configuration option.
Page 40
8. Subtitle Font: To select the subtitle font size for DivX video. There are three font sizes available. This setting applies only to DivX video files with a text subtitle. DivX video files with a graphic subtitle do not use the DVD player’s built-in font, so the font size cannot be adjusted. www.divx.com/vod...
S E T U P M E N U O P T I O N S Speaker Setup Page 1. Down-mix Mode: To set the audio down-mix mode for converting multi-channel audio into two- channel output. This setting affects the analog and HDMI audio outputs. The options are: •...
Page 42
S E T U P M E N U O P T I O N S 6. Channel Delay: To set the delay time for the center, rear speakers and the subwoofer. The delay is to compensate for the audio propagation time difference caused by the distance difference of the speakers to the listener.
Page 43
S E T U P M E N U O P T I O N S Example Channel Delay Adjustment: Supported Configuration Settings: Center Speaker – 4 Inches Subwoofer – 4 Inches Left Surround – 12 Inches Right Surround – 12 Inches Unsupported Configuration Settings: Center Speaker –...
Press the SELECT button to confirm the setting. 4. Pro Logic II: Taking a step further than most DVD players, the OPPO DVD player allows you to configure Dolby Pro Logic II to expand 2-channel source audio into full 5-channel surround sound.
Page 45
S E T U P M E N U O P T I O N S • On – Pro Logic II processing is always on • Off – No Pro Logic II processing • Auto – Pro Logic II processing is on only when Dolby Pro Logic II encoded content is detected.
Page 46
However if your receiver does not have such functions, you may adjust channel trim on the DVD player. For most accurate results, it is recommended that you use test tones from a calibration disc, such as AVIA Guide to Home Theater, and a SPL (Sound Pressure Level) meter.
DVD player and your television to get just the right result. We recommend using a calibration DVD like AVIA Guide to Home Theater or Digital Video Essentials and setting your display for the best possible picture. Once that is done, see if the DVD player settings can get even closer.
Page 48
(composite and S-Video). 9. RGB Range: To select the HDMI RGB output range. This setting only affects output in RGB color space, primarily used when the DVD player is connected to a DVI input. The options are: • Normal – Normal RGB range suitable for video display.
The Preference Page can only be accessed when playback is completely stopped, or when there is no disc in the DVD player. 1. TV Type: To set the output video system (PAL/NTSC) to match the type of TV. The options are: •...
Page 50
S E T U P M E N U O P T I O N S • Press the SELECT button to confirm the selection. You will be asked for the parental control password. Enter the password (default password: 7890) and press the SELECT button.
REFERENCES Useful Notes • In order to prolong the service life of your DVD player, it is recommended to wait at least 30 seconds before you turn it on again after switching it off. • Remove disc and turn off power after operation.
If the region number of a DVD disc does not correspond to the region number of this DVD player, this DVD player cannot play the disc. The region number for this DVD player is region No.1.
R E F E R E N C E S Language Code List Code Language Name 6565 Afar 6566 Abkhazian 6570 Afrikaans 6577 Ameharic 6582 Arabic 6583 Assamese 6588 Aymara 6590 Azerbaijani 6665 Bashkir 6669 Byelorussian 6671 Bulgarian 6672 Bihari 6678 Bengali, Bangla 6679...
This warranty does not apply to products purchased or shipped outside of the U.S.A. and Canada. OPPO Digital, Inc. may at its sole discretion, refuse to honor the warranty of any such unauthorized product that may be presented for service.
Page 55
Send the package postpaid and insured to the OPPO service center to obtain warranty service. Thank you for choosing OPPO. Your satisfaction is our highest priority. 5195150 V2.1 OPPO Digital, Inc. 453 Ravendale Dr. Suite D Mountain View, CA 94043, U.S.A. www.oppodigital.com service@oppodigital.com...