Filling The Engine With Oil - Toro 22155TE Operator's Manual

Figure 9
B. Remove the air cleaner cover to see the throttle
on the engine more easily (Figure 10).
Figure 10
C. Move the throttle lever on the engine until
the throttle lever just touches the choke lever
(Figure 11).
Figure 11
1. Set screw
2. Choke lever
3. Throttle lever
D. Tighten the set screw (Figure 11).
E. Install the air cleaner cover.
8. Install the back cover with the two screws you
removed in step 1.
2

Filling the Engine with Oil

Parts needed for this procedure:
20 oz. SAE 30 detergent oil with an API service classification
(0.55 l) of SH, SJ, SL, or higher (not supplied with the mower).
Procedure
Important: Your mower does not come with oil
in the engine.
1. Remove the dipstick (Figure 12).
2. Slowly pour oil into the oil fill tube, periodically
checking the level with the dipstick, until the dipstick
indicates that the engine is full as illustrated in
Figure 12. Do not overfill. (Max. fill: 20 oz. (0.55
l), type: SAE 30 detergent oil with an API service
classification of SH, SJ, SL, or higher.)
Note: If you overfill the engine, pour some oil out
of it as directed in Changing the Engine Oil.
3. Install the dipstick securely.
Important: Change the engine oil after the first
5 operating hours ; change it yearly thereafter.
Refer to Changing the Engine Oil.
9
Figure 12