Table of Contents
Advertisement
Naming a preset station
FM STEREO / AM TUNER
STANDBY/ ON
Naming a preset station
You can name the preset stations so that the name,
instead of the frequency, appears on the display
when you press the DISPLAY button. (For more
information, see "Display options" on page 16.)
Note
You cannot enter characters for an RDS station
that has a program service (PS) name, since the PS
name has priority over other character information.
(For more information on RDS stations, see page 22.)
• RDS reception is available only on the European
models.
1
Select the station you wish to
name. (See "Selecting preset stations" on
page 18.)
AUTO
2
Press the CHARACTER button.
The T-405X enters character input mode, and
"....." flashes on the display.
CHARACTER
Flash
AUTO
MEMORY
√PRESET®
PRESET
BAND
TIMER
MEMORY
CLEAR
AUTO / MONO
TUNING
DISPLAY
CHARACTER
T-405X
CHARACTER
STEREO
MHz
STEREO
The following 54 characters can be used:
A B C D E F G H I J K L M N O P Q R S
T U V W X Y Z " & ' ( ) * + , - . / = ? [ \ ]
| 0 1 2 3 4 5 6 7 8 9
3
Use the PRESET √ or ® button to
select a character.
The character flashes on the display.
PRESET
Flash
AUTO
4
Press the MEMORY button to store
the character.
Flashing "....." mark appears next to the stored
character.
Repeat the steps 3 and 4 to store more
characters. You can store up to 8 characters.
To enter a space between characters, press
the MEMORY button. The bar cursor moves
on to the next position.
MEMORY
Flash
AUTO
(continued on the next page)
STEREO
STEREO
19
Advertisement
Table of Contents
