Connecting The T-4555; Connecting To An Amplifier; About The System Functions - Onkyo T T-4555 Instruction Manual

Connecting the T-4555

Before Making Any Connections
• Refer to the instructions that came with the com-
ponent you are connecting.
• Do not plug in the power cord until all other con-
nections are complete.
• Do not bind audio cables with power cords and
speaker cables. Doing so may adversely affect the
sound quality.
• To prevent interference, keep power cords and
speaker cables as far away as possible from the
antennas.
Connecting to an Amplifier
Use the supplied audio cable to connect the T-4555's
AUDIO OUTPUT L/R jacks to the TUNER IN jacks on
your amplifier, as shown.
To use the system functions, use the supplied
cable to make an
Supplied audio
cable
L
R
TUNER
Note:
• If the T-4555 is used with another Onkyo component,
such as the A-9555, refer to its instruction manual as
well.
12
connection (see the next column).
T-4555
Supplied cable
Amplifier
RCA Audio Connection Color Coding
• Red plugs are used for the right channel, white
plugs are used for the left channel.
Left (white)
Right (red)
• Push each plug in all the way to make a good con-
nection (loose connections can cause noise or mal-
functions).
Right!
Wrong!

About the System Functions

If you connect the T-4555 to another Onkyo
ble component with the supplied
cable, you can use the following system functions.
cables are special cables solely for use with Onkyo
products.
Auto Power On
When you turn on the T-4555, your Onkyo amplifier
will turn on automatically. (The amplifier's POWER
switch must be set to ON for this to work.)
Direct Change
When you select a radio preset or change the band (AM,
FM, DAB), your Onkyo amplifier will automatically
select the T-4555 as the input source.
Remote Control Operation
You can control the T-4555 by using your Onkyo ampli-
fier's remote controller. See the amplifier's instruction
manual for details.
L
R
-capa-
cable and audio