First Time Setup; Assigning Digital Inputs To Input Sources; Changing The Input Display - Onkyo HT HT-S990THX Instruction Manual

First Time Setup

Assigning Digital Inputs to Input
Sources
1
STANDBY/ON
STANDBY
MULTI CH DVD VIDEO 1 VIDEO 2 VIDEO 3
VCR
PHONES
SPEAKERS
A B TONE THX LISTENING MODE
To enjoy Dolby Digital and DTS, you must connect your
DVD player to the AV receiver digitally (coaxial or opti-
cal).
Here are the default assignments.
Input selector
Default assignment
DVD
VIDEO 1
VIDEO 2
VIDEO 3
TAPE
CD
With this function, you can change the digital inputs
assign. If, for example, you connect your DVD player to
the DIGITAL IN OPTICAL 1 input (OPT1), you'll need
to assign it to the DVD input source, as follows.
1 Press the input selector button
for the input source that you want
DVD VIDEO 1 VIDEO 2
to assign.
(Digital inputs cannot be assigned to
VCR
VIDEO 3 TAPE
the TUNER input source.)
C D
2
Press the [DIGITAL INPUT]
button.
DIGITAL
INPUT
The current assignment appears.
3 Press the [DIGITAL INPUT] but-
ton repeatedly to select COAX,
DIGITAL
INPUT
OPT1, OPT2, OPT3, or "– – – –"
(analog).
Note:
Make sure that components connected digitally are con-
figured to output digital audio. Refer to the relevant man-
uals.
2, 3
MASTER VOLUME
TUNING PRESET
ENTER
TAPE TUNER C D RETURN SETUP
VIDEO 3 INPUT
VIDEO L AUDIO R
DIGITAL TUNING
DISPLAY INPUT DIMMER MEMORY MODE
CLEAR
COAX
OPT 1
OPT 2
- - - -
- - - -
OPT 3

Changing the Input Display

If you connect an -capable Onkyo MiniDisc
recorder, CD recorder or next generation HDD-compat-
ible component to the TAPE IN/OUT or VIDEO 2 IN
jacks, for to work properly, you must change this
setting.
This setting can only be changed on the AV receiver.
1, 2
STANDBY/ON
STANDBY
MULTI CH DVD VIDEO 1 VIDEO 2 VIDEO 3
VCR
PHONES
SPEAKERS
A B TONE THX LISTENING MODE
1
Press the [TAPE] or [VIDEO 2]
input selector button so that
TAPE
"TAPE" or "VIDEO2" appears on
the display.
or
VIDEO 2
2
Press and hold down the [TAPE]
or [VIDEO 2] input selector but-
TAPE
ton (about 3 seconds) to change
the setting.
Repeat this step to select MD, CDR, or
or
HDD.
VIDEO 2
For the TAPE input selector, the setting
changes in this order:
→
TAPE
For the VIDEO 2 input selector, the set-
ting changes in this order:
VIDEO 2
Note:
HDD can be selected for the TAPE input selector or
VIDEO 2 input selector, but not both at the same time.
1, 2
MASTER VOLUME
TUNING PRESET
ENTER
TAPE TUNER C D RETURN SETUP
VIDEO 3 INPUT
VIDEO L AUDIO R
DIGITAL TUNING
DISPLAY INPUT DIMMER MEMORY MODE
CLEAR
→ →
MD CDR HDD
↔
HDD
35