First Time Setup; Changing The Input Display - Onkyo S3100 Instruction Manual

First Time Setup

Assigning Digital Inputs to Input
Sources
STANDBY/ON
STANDBY
A SPEAKERS B TONE +
PHONES
MULTl CH DVD VIDEO 1/VCR
To enjoy Dolby Digital and DTS, you must connect your
DVD player to the AV receiver by using a digital audio
connection (coaxial or optical).
Here are the default assignments.
Input selector
DVD
VIDEO 1/VCR
VIDEO 2
VIDEO 3
TAPE
CD
With this function, you can assign digital inputs to input
sources. For example, if you connect your DVD player
to DIGITAL IN OPTICAL, you'll need to assign that
input (OPT1) to the DVD input source.
You can change the assignments as follows.
Note:
Make sure you also set your digital sources to send out a
digital signals. Please refer to the digital sources' man-
ual.
1 Press the input selector button
for the source that you want to
DVD VIDEO 1/VCR VIDEO 2
assign.
(Digital inputs cannot be assigned to
VIDEO 3 TAPE TUNER
the TUNER input source.)
CD
2
Press the [DIGITAL INPUT]
button.
DIGITAL INPUT
The current assignment appears.
3
Press the [DIGITAL INPUT] but-
ton repeatedly to select COAX,
DIGITAL INPUT
OPT1, OPT2, or "– – – –" (analog).
38
2, 3
TUNING / PRESET
ENTER
RETURN SETUP
STEREO LISTENING MODE DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
CLEAR
VIDEO 2 VIDEO 3 TAPE TUNER CD
1
Default assignment
COAX
- - - -
OPT 1
- - - -
- - - -
OPT 2

Changing the Input Display

If you connect an
recorder, CD recorder, or RI Dock to the TAPE IN/OUT
or VIDEO 3 IN jacks, for
must change this setting.
MASTER VOLUME
This setting can only be changed on the AV receiver.
STANDBY/ON
A SPEAKERS B
PHONES
iPod photo: If you're using an iPod photo with the
DS-A1 Remote Interactive Dock, connect the DS-A1's S
VIDEO jack directly to an S-Video input on your TV.
1
TAPE
or
VIDEO 3
2
TAPE
or
VIDEO 3
Note:
HDD can be selected for the TAPE input selector or
VIDEO 3 input selector, but not both at the same time.
-capable Onkyo MiniDisc
to work properly, you
STANDBY
TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
CLEAR
MULTl CH DVD VIDEO 1/VCR VIDEO 2 VIDEO 3 TAPE TUNER
1, 2 1, 2
Press the [TAPE] or [VIDEO 3]
input selector button so that
"TAPE" or "VIDEO3" appears on
the display.
Press and hold down the [TAPE]
or [VIDEO 3] input selector but-
ton (about 3 seconds) to change
the setting.
Repeat this step to select MD, CDR, or
HDD.
For the TAPE input selector, the setting
changes in this order:
→ →
TAPE MD CDR
For the VIDEO 3 input selector, the set-
ting changes in this order:
→
VIDEO 3 HDD
TUNING / PRESET
MASTER VOLUME
ENTER
RETURN SETUP
CD
→
HDD