Onkyo DX-C380 Instruction Manual page 15

Using memory functions
TRACK
After two seconds
TRACK
MEMORY CLEAR
MEMORY CLEAR
/ /
REMOTE CONTROLLER RC-331C
Notes about the time display
In the following cases, the time display may indicate "– – : – –" due to the memory limitations.
• If you switch to the remaining time display while the CD changer is playing the 21st or later song on the disc
• If you switch to the total remaining time display after storing the 21st or later song on the disc
• If you switch to the total remaining time display after the CD changer plays songs from memory for more than 99 minutes 59 seconds,
or
• If you switch to the total remaining time display during random playback of a CD that contains 21 or more songs.
a
b
MEMORY DISC No.
c
MEMORY DISC No.
TOTAL REMAIN
e
REMOTE CONTROLLER RC-331C
REMOTE CONTROLLER RC-331C
MEMORY
TRACK
1 2 3
4 5 6
d
1 2 3
4 5 6
CLEAR
MEMORY
1 2 3
DISC No.
4 5 6
Contents of the display
Example: When the sixth track of DISC #5
is stored in memory as the second track to
play back (P-02).
Track number
MEMORY indicator
Program number
Disc Number
Total number of stored programs
Clearing the last track stored
Press the CLEAR button.
The last track stored in memory is cleared.
Clearing the entire program
Press the MEMORY button to turn off the
MEMORY indicator.
The contents of memory are completely
cleared.
Checking what is stored in
memory
1. First, if the CD changer is playing in
memory playback mode, press the STOP
button. The CD changer will display the
last program number stored in memory.
2. If you press and hold down the
button, the track numbers in memory will
appear in the display in the order in which
they were stored. If you press and hold
down the / button, the track
numbers will appear in the opposite or-
der.
/
15