Tv Format Setup (Not North American Models); Am Frequency Step Setup (On Some Models) - Onkyo TX-SR804E Instruction Manual
Onkyo av receiver instruction manual
Hide thumbs
Also See for TX-SR804E:
- Service manual (237 pages) ,
- Instruction manual (96 pages) ,
- Service manual (112 pages)
Table of Contents
Advertisement
TX-SR804/804E_En.book Page 47 Monday, September 4, 2006 9:34 AM
First Time Setup —Continued
TV Format Setup
(not North American models)
You must specify the TV system used in your area.
1
Press the [RECEIVER] button,
RECEIVER
followed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "8. Hardware
Setup," and then press [ENTER].
ENTER
The Hardware Setup menu appears.
8.Hardware Setup
------------------------
a.PoweredZone2:NotAct
b.TV Format
b.TV Format
c.AM Freq. Step: 9kHz
ENTER
d.Remote ID
3
Use the Up and Down [
buttons to select "TV Format,"
and then use the Left and Right
ENTER
[
]/[
Auto: Select this to automatically
NTSC: Select if the TV system in
ENTER
PAL: Select if the TV system in
4
Press the [SETUP] button.
Setup closes.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
]/[
]
:Auto
:Auto
:1
]/[
]
] buttons to select:
detect the TV system from the
video input signals.
your area is NTSC.
your area is PAL.
AM Frequency Step Setup
(on some models)
You must specify the AM frequency step used in your
area. Note that when this setting is changed, all radio
presets are deleted.
1
Press the [RECEIVER] button,
RECEIVER
followed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
buttons to select "8. Hardware
Setup," and then press [ENTER].
ENTER
The Hardware Setup menu appears.
8.Hardware Setup
------------------------
a.PoweredZone2:NotAct
b.TV Format
c.AM Freq. Step: 9kHz
c.AM Freq. Step:10kHz
ENTER
d.Remote ID
3
Use the Up and Down [
buttons to select "AM Freq.
Step," and then use the Left and
ENTER
Right [
]/[
10 kHz: Select if 10 kHz steps are
used in your area.
9 kHz: Select if 9 kHz steps are used
in your area.
ENTER
4
Press the [SETUP] button.
Setup closes.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
]/[
]
:Auto
:1
]/[
]
] buttons to select:
47
Advertisement
Table of Contents
