Table of Contents
Advertisement
Choke
Primer (start aid)
Push primer three times.
Properly dispose of
batteries.
Insert key in ignition
switch.
Assembly
Note: Determine the left and right sides of the lawn mower by standing in the operating position.
Installing the Handle
WARNING
POTENTIAL HAZARD
Folding or unfolding the handle improperly can
pinch, stretch, or damage one or more of the
cables.
WHAT CAN HAPPEN
Any pinched, stretched, or damaged cable may
cause an operational failure that results in an
unsafe operating condition.
HOW TO AVOID THE HAZARD
Do not pinch, stretch, or damage the cables.
Handle the cables with care when folding or
unfolding the handle.
Do not use the lawn mower if one or more of
the cables are pinched, stretched, or damaged.
Contact your Authorized Service Dealer.
Turn key in ignition
switch.
Move control.
Pull rope.
Wheel
Wheel traction
1. Loosen the handle knobs and lift the upper handle up
until the upper and lower handle sections are in line
and nest together.
2. Lightly tighten one of the handle knobs.
3. Insert the left end of the lower handle and the cable
guide onto the pin on the left mounting bracket
(Fig. 2).
1
1. Mounting bracket
4. Install the right end of the lower handle onto the pin
on the right handle mounting bracket (Fig. 2).
7
1
2
m–4357
Figure 2
2. Cable guide
Advertisement
Table of Contents
