Installing The Seat - Toro Z400 Series Z-Master Setup Instructions

Figure 10
8. Tighten the front knobs against the center roll
bar ends.
Figure 11
Step
5

Installing the Seat

Parts needed for this step:
Procedure
1. Remove the bolt and nut from the seat frame.
2. Remove the nuts from the studs under the seat.
3. Secure the seat rod to the seat with the bolt
and nut.
4. Install the seat to the seat frame with the
previously removed nuts.
Figure 12
5. Install the seat rod to the seat frame.
Figure 13
5