Checking The Tire Pressure - Toro Z400 Series Z-Master Setup Instructions

Step
Operator's Manual
Parts Catalog
Engine Owner's Manual
14
Registration Card
Safety Video
Key
Step
1
Removing Parts from the
Crate
No Parts Required
Procedure
Remove the tires, the seat and the parts for the
ROPS from the shipping crate.
Step
2

Checking the Tire Pressure

No Parts Required
Procedure
Check the air pressure in the front and rear tires.
Pressure: 13 psi (90 kPa)
Figure 1
Description
Step
Raising the Machine Up and
Installing the Drive Wheels
Parts needed for this step:
Procedure
1. Remove the screws holding the right angle
2. Raise the back of the machine up and support
2
Qty.
1
1
1
Delivering the machine to the
customer.
1
1
2
3
2 Rear wheels
retaining plate to the crate.
Figure 2
it with jack-stands.
Use