Connecting A Dvd Player - Onkyo TX-SA706 Instruction Manual

Connecting the AV Receiver/AV Amplifier—Continued

Connecting a DVD Player

See "Connecting Components with HDMI" on page 33 for HDMI connection information.
Step 1: Video Connection
Choose a video connection that matches your DVD player ( ,
You must connect the AV receiver/AV amplifier to your TV via the same type of connection.
Step 2: Audio Connection
Choose an audio connection that matches your DVD player ( ,
• With connection
• To enjoy Dolby Digital and DTS, use connection
or and .)
a c
• If your DVD player has main left and right outputs and multichannel left and right outputs, be sure to use the
main left and right outputs for connection
Connection
COMPONENT VIDEO IN 1 (DVD)
A
B
C
a
b
DIGITAL OPTICAL IN 1 (GAME/TV)
c
b
c
A
Connect one or the other
c
Connection must be assigned (see page 44)
26
, you can listen to and record audio from a DVD and listen in Zone 2.
a
AV receiver/AV amplifier
DVD S
DVD V
DVD FRONT L/R
DIGITAL COAXIAL IN 1 (DVD)
COAXIAL OPTICAL
OUT OUT
COMPONENT VIDEO OUT
To connect a DVD player or DVD-Audio/SACD-capable player with a
multichannel analog audio output, see page 27.
, or , and then make the connection.
)
A B C
, or
a b c
or . (To record or listen in Zone 2 as well, use
b c
.
a
Signal flow
⇐
⇐
⇐
⇐
⇐
⇐
L R
Y P P AUDIO
B R
OUT
DVD player
), and then make the connection.
DVD player
Component video output
S-Video output
Composite video output
Analog audio L/R output
Digital coaxial output
Digital optical output
C C
a
S VIDEO VIDEO
OUT OUT
and ,
a b
B B