Onkyo TX SR804 Instruction Manual page 61

Using the Listening Modes—Continued
The following table shows which listening modes can be used with each input signal format.
Source format
Listening mode
Pure Audio
Direct
Stereo
Mono
Multich
*4
PLIIx Movie/Music/Game
Neo:6 Cinema
*5
Neo:6 Music
Dolby D
Dolby D EX
Dolby D+PLIIx Music
Dolby D+PLIIx Movie
DTS, DTS 96/24
DTS-ES Discrete
DTS-ES Matrix
DTS+Neo:6
DTS+Dolby EX
DTS+PLIIx Music
DTS+PLIIx Movie
THX Cinema
THX Surround EX
THX Select2 Cinema
THX Music mode
THX Games mode
Mono Movie
Orchestra
Onkyo Unplugged
*5
Original Studio-Mix
DSP TV Logic
All Ch Stereo
Full Mono
*1. In the Pure Audio and Direct listening modes, 32 kHz, 44.1 kHz, and 48 kHz PCM is processed at 64 kHz, 88.2 kHz, and 96 kHz respectively. In
listening modes other than Pure Audio, Direct, and Stereo, 96 kHz PCM is processed at 48 kHz.
*2. In listening modes other than Pure Audio, Direct, Stereo, and DTS 96/24, DTS 96/24 sources are processed as normal DTS.
*3. The Multich listening mode cannot be used with 176.4/192 kHz PCM sources connected to an HDMI IN.
*4. If the Surr Back parameter is set to None, or the ZONE 2 SPEAKERS terminals are being used, normal Pro Logic II is used.
*5. Available only when surround speakers are connected.
*6. If the Surr Back setting is set to None, or the ZONE 2 SPEAKERS terminals are being used, normal DTS is used.
: Only available on 6.1/7.1-channel playback systems. Not available while the ZONE 2 SPEAKERS terminals are
being used.
: Only available on 7.1-channel playback systems. Not available while the ZONE 2 SPEAKERS terminals are
being used.
Tip: To check the format of the digital input signal, see "Displaying Source Information" on page 59.
Dolby Digital
Analog,
*1 3/2.1
PCM
2/0
2/2.1
CD, TV,
radio,
DVD, DTV, etc.
cassette,
etc.
✔ ✔ ✔
✔ ✔ ✔
✔ ✔
✔
✔
✔
✔ ✔ ✔
✔
✔
✔ ✔ ✔
✔ ✔ ✔
DTS/DTS 96/24
3/2.1
1/0, 1+1 Other
2/2.1
✔ ✔ ✔
✔ ✔ ✔
✔
✔
✔
✔
✔ ✔
✔
✔
✔
✔ ✔ ✔
*2
Multich
analog,
DTS-ES
Multich
2/0
PCM
Discrete Matrix
DVD, CD, etc. DVD
✔ ✔ ✔
✔ ✔
✔
✔
✔
*6
✔
✔
✔ ✔
✔
✔ ✔
*3
61