Ptz Setup - D-Link DCS-5029L User Manual

Hd pan & tilt day/night network camera

Table of Contents

Section 4 - Configuration

This section allows you to configure the pan and tilt operations for your camera. You can set the lens location for the Home (+) button, and specify

up to 24 pre-set points, allowing you to view these pre-determined areas from the Live Video screen. You can also create preset sequences.

Pan Step:

Select the increment of movement for each press of a pan (up/down)

arrow on the PTZ Control. (A low number for slower pan speed, and

a high number for a faster pan speed.)

Tilt Step:

Select the increment of movement for each press of a tilt (left/right)

arrow on the PTZ Control. (A low number for slower tilt speed, and a

high number for a faster tilt speed.)

Preset No:

Select an available number from the drop-down menu for the

preset point you want to create. (Available numbers will be listed as

"nonsetting".)

Preset Name:

Enter a name for your new preset. point Use the PTZ Control to set the

view you want to assign to the preset, and click Add. If you select an

existing Preset Name from the Preset List, you can change the name

by typing in a new name and then clicking Rename.

Preset List:

Click on the drop-down menu to view the list of preset points. You

can select a name from this list to Rename or Remove from the list.

Select a name from the drop-down menu and click Set to assign the

Choose as

Home:

selected preset point as the Home (+) position.

Auto Pan

Select a number from the drop-down menu representing the speed

Speed:

at which the camera will pan. You can choose a value between 0 and

10, with 0 being the slowest. Click the Test button to view the camera

movement at the selected pan speed.

Proceed to the next page for instructions for creating a preset sequence.

D-Link DCS-5029L User Manual

PTZ Setup

Table of Contents

Show Quick Links

Table of Contents