Supplied Accessories; Unpacking And Storing The Packing Materials - Integra RDA-7.1 Instruction Manual

Thank you for purchasing an Integra Research
Seven Channel Amplifier.
Please read this manual thoroughly before
making connections and plugging in the unit.
Following the instructions in this manual will
enable you to obtain optimum performance and
listening enjoyment from your new Seven
Channel Amplifier. Please retain this manual
for future reference.

Supplied accessories

Check that the following accessories are supplied with the
RDA-7.1.
The power cord may differ
Stereo mini-plug cable × 1
(for connecting the 12V TRIGGER IN
jack to the AV controller that have a
12V Trigger output jack)
Power cord
and Stereo
mini-plug cable
6
Power cord × 1
depending on the region.
Instruction Manual
Inner carton
Unpacking and storing
the packing materials
Unpacking
When unpacking the RDA-7.1, be sure to remove all
accessories from the cardboard box and then check that
all are included and none are missing.
Inner carton
Removing the RDA-7.1
After removing the RDA-7.1, carefully inspect it to make
sure that it has not been damaged during the shipping
processes. If damaged, contact an Onkyo service station
or representative immediately. Also, take down the name
of the carrier in case it is necessary to obtain
compensation from the carrier service.
Poly bag
Storing the packing materials
After unpacking, store the cardboard box and packing
materials in a safe place; do not throw them away. If you
are to transport the RDA-7.1 at a later date, you will need
this cardboard box and the packing materials. The RDA-
7.1 is very heavy and may become damaged if it is
transported in a different box.
Inner carton
Outer carton
(Shipping carton)
Pad
Pad
Poly bag