Adjusting Harness Position And Headrest Height Forward-Facing Mode - Britax safe-n-sound Instructions For Installation & Use

HOW TO USE
ADJUSTING HARNESS POSITION & HEADREST HEIGHT
FORWARD-FACING MODE
Correct fitment of the harness is very
important as it restrains the child in the seat.
The headrest must be in the correct position
and the harness must fit firmly around upper
torso of the child and be positioned so as to
leave the child's arms and legs free.
The headrest must be in a position whereby
the shoulder straps must be in the slots which
are nearest to the child's shoulders, but not
more than 25 mm below the child's shoulders.
Always adjust the height of the shoulder
straps as the child grows.
If the headrest is in the top position and the
shoulders are above the upper shoulder
height marker then the child is too tall for the
restraint and the restraint should not be used;
move to next type of restraint (see pages 21).
NOTE: This child restraint does not require
the shoulder straps to be disconnected to
adjust their height, only the headrest needs to
be moved to adjust the shoulder strap
70
Instructions for Installation & Use
SHOULDER STRAP POSITION
Upper and
middle shoulder
height marker
hidden when the
headrest is not at
full height
Lower shoulder
height marker
Harness
Adjuster button
Harness
adjuster strap
25mm