Chapter 7
f
Press Setup Receive.
g
Press a or b to display Remote Codes.
h
Press Remote Codes.
i
Do one of the following:
If you want to change the Remote
Activation Code, press Act.Code.
Enter the new code, and then
press OK.
If you want to change the Remote
Deactivation Code, press
Deact.Code.
Enter the new code, and then
press OK.
If you do not want to change the
Codes, go to step j.
If you want to turn the Remote Codes
Off (or On), press Remote Codes.
Press Off (or On).
j
Press
.
NOTE
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
three-digit code using the numbers 0-9, l,
#.
• Remote Codes might not work with some
telephone systems.
70