Connecting The Mouse - Fujitsu CELSIUS W550 Operating Manual

If an additional display adapter other than the CPU display adapter is
plugged into the system, only one additional monitor is provided for display
on the onboard display adapter. The two others act as ServicePorts and
are not intended for simultaneous image playback.
The DisplayPort is the preferred port. Therefore, the cover here can be broken off with
the help of a predetermined breaking point, in order to make the port accessible. If a
DVI or VGA port is required, the display adapter cover must be removed.

Connecting the mouse

You can connect a USB mouse or a PS/2 mouse to your device.
Mouse, Connecting,
Connecting a USB mouse
► Connect the USB mouse to one of the USB ports on the device.
USBport USBport,
Connecting a PS/2 mouse
The PS/2 mouse is only detected by the device if you connect the mouse when
the device is switched off and then switch the device on again.
► Switch your device off.
If you do not attach a mouse to the PS/2 mouse port, you can disable the mouse
controller in the BIOS Setup in order to free the IRQ12 for a different application.
► Connect the PS/2 mouse to the PS/2 mouse port of the device.
PS/2mouse, Connecting, PS/2mouse,
► Switch your device on again.
Fujitsu
Getting started
17