Removing A Board - Fujitsu CELSIUS W550 Operating Manual

Removing a board

► Open the casing (see
Board
► Disconnect the cables connected to the board.
► Push the retaining clip (1) towards the slot cover to unlock it, then move
it towards back panel of the device.
► Pull the board out of the slot in the direction of the arrow (2).
► Place the board in suitable packaging.
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
compatibility) regulations, you must refit the slot cover.
► Slide the slot cover into the slot (1).
Fujitsu
"Opening the casing", Page
1
2
1
2
2
34).
System expansions
51